You have no items in your shopping cart.
Write Review
$27.99
Brand:
Availability: 52 In Stock
Porc-A-Fix offers a simple, affordable way to repair cracks, scratches, and small chips in your porcelain bathroom & kitchen fixtures, appliances, and tiles. It can be used on porcelain, cast iron, steel and much more.
Available in more than 800 colors – virtually every color produced by the major bathroom fixture and kitchen appliance manufacturers since 1929 – Porc-A-Fix is unparalleled when it comes to matching the color, hardness, and gloss of the original enameled finish. It is the only “fix” on the market that is good under water.
Keep your porcelain surfaces looking fresh and new with this fantastic touch-up tool. Porc-A-Fix will repair any unsightly nicks or scratches, filling them in to leave the surface looking good as new!
Each package contains 1/2 ounce (15cc) of touch-up material, brush top applicator, finishing paper and complete instructions, and is individually color coded for easy contents identification. Simple to apply, as there is no mixing of ingredients or long waiting periods. It is non-yellowing and will retain a high gloss that lasts and lasts.
This item is shipped directly from our NJ warehouse. Once the factory seal is broken, shelf life is limited due to external factors and cannot be guaranteed. Porc-A-Fix is intended for a one time use as per the manufacturer, but if stored in ideal conditions further applications may be available.
Key Features:
- Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging
- Matches color Peachblow.
- Product Type: Repair Glaze.
- Brand: To match Kohler.
- Not recommended for use with other products.
- Porc-A-fix Porcelain repair touch up glaze kit
- Easy-to-use, fast drying, no-mix ready to apply
- Non-yellowing / High Gloss / No Mixing of Ingredients
- Contains 1/2 ounce (15cc) of touch up material, brush top applicator, and finishing paper
- Unique, one-step process to repair unsightly chips, scratches and other imperfections in porcelain and Enamel tubs, sinks, toilets, washers, dryers, kitchen appliances and tile.
It is also simple to use: Apply, let dry, and buff! If you already know the manufacturer’s color name, it’s easy to select the color you need from the more than 800 available choices. If you are not sure, we’ll help you find the one that’s right for you with answers to a few simple questions or a color sample that can be sent in.
DISCLAIMER: Colors on a website or printed from a website can vary drastically from the actual color of the fixture due to monitor and printer settings. The images on this page are for approximate visual use and should not be used to match colors exactly to your fixture. Contact us for help if you are not sure of the color of your fixture before purchase.
| Brand | Fixture Fix |
|---|---|
| SKU | PORCAFIX-KK2 |
| Barcode | 014929910166 |
| Weight | 0.25 lb |
| Product Type | Repair Glaze |
| Collections | Fixture Fix Glaze Home Improvement Porc•A•Fix Tools |
| Tags | $25-49Free ShippingHome ImprovementKohlerPeachblowPorc-A-FixRepair GlazeTools |
Preparation
Ensure that the damaged area and surrounding surface are clean and dry - free of dust, dirt, grease, soap residue, wax and cleaners.
Though not necessary, for a stronger bond you can carefully rough up the damaged area with the enclosed finishing paper (220 grit aluminum oxide sandpaper). The small cut of 1" x 3" allows more selective sanding of small repair areas.
For deep chips and gouges, you should first fill them with Fill•A•Fix before using Porc-A-Fix.
Repair
Shake the bottle for at least 30 seconds and allow it to sit for at least one minute prior to opening the cap. This will allow excess material on the cap or brush to roll back into the bottle. Open the cap carefully, making sure to wipe off any excess material on the lip of the bottle with a cloth.
Apply in thin layers, allowing at least one hour drying time between coats. The drying time can be decreased to several minutes by using a hand held hair dryer on the coolest setting, held at least one foot away from the repair. Use a back and forth fanning motion with the hair dryer - do not hold it stationary over one area.
Dry for 24 hours after the last layer is applied. If any brush marks remain, or if any debris has settled into the repair, sand very lightly after drying to remove these imperfections. You may use the enclosed 220-grit finishing paper, or use additional paper of similar or finer grit as you deem fit.
Finish. You may first fine-finish the repaired area with 360-600 grit silicon carbide sandpaper to save buffing time. If you do, sand just until the glaze is smooth with the surrounding porcelain, gently to avoid sanding through the glaze. Note: for many minor repairs, sanding after the final coat may not be necessary.
Then buff the repair and surrounding area with a soft cloth and a bit of automotive polishing compound.
Post-Operative Care
For routine cleaning of the repaired area, use a mild liquid abrasive or dishwashing liquid; we recommend this not only for the repaired area, but for the entire fixture. Do not use harsh chemicals or abrasive cleaners on the repaired area. This will reduce the chance of scratches from surface dirt or abrasion.
Import Duties and Clearance Fees are the Responsibility of the Buyer. Our Free Shipping Policy does not apply to International Addresses. All International Orders will be accompanied by a Commercial Invoice that states a description of the goods, the sale price, and the country of origin of the goods.
Please choose your shipping service carefully as USPS First Class International may not have Tracking Information available for all countries. No Items will be replaced or No refunds will be issued on International Shipping, so choosing USPS Priority Mail International is definitely your better choice.
By choosing USPS First Class International as your service you agree to our terms and conditions and will not hold us responsible for loss or damage to the package and items in it.
Please contact us at cs@hardtogetitems.com and we would be happy to quote you a shipping rate based on the weight of the items you would like to purchase.
